Testing FAQs

This is a complete list of FAQs for the energy efficient products portal, please filter by the relevant keywords or categories.

Filter by

Testing FAQs (352)

RSS

Showing results 120 to 130

For combination heaters with components delivered separately, should the manufacturer use one or two labels when bringing the products to the market?

If the combination heater and the domestic hot water tank are sold under two different model identifiers, then the domestic hot water tank is ...

For displays regulated in (EU) 2019/2021, what verification tolerance should be used when it comes to peak white luminance ratio in market surveillance?

The answer is: 'The peak white luminance ratio is calculated from the two declared values and is implicitly verified if the two declared values used ...

For heat pump water heaters using ventilation exhaust air, indoor air or brine or water as the heat source, how to fill in the data for the colder and warmer conditions?

In the case of heat pump water heaters using indoor air, exhaust air, brine or water as a heat source, there is no possible differentiation according ...

For the provision of tyre labels in electronic form, is a delegated act foreseen?

Individual units of tyres made available on the Union market have to bear a sticker, or be accompanied by a printed label in the case of batches of ...

For those local space heaters that can be operated with different types and combinations of fuels: is the compliance with Ecodesign requirements needed only for the prefe

No. Ecodesign requirements need to be fulfilled with all fuels the product is marketed ...

For tyres produced between 25/06/20 and 30/04/21: Shall all tyres produced during that period and placed on the market after 1/05/21 new label from this date?

Units of C1 and C2 tyres produced in the period between 25 June 2020 and 30 April 2021 but placed on the EU market as from 1 December 2021 must be ...

For vehicle manufacturers, does the obligation of providing the label and the PIS arise at the time of final delivery of the vehicle ??

No, there is no such obligation. The regulation assumes that the label and the PIS must be an instrument of an informed purchase choice, thus providing information ‘before the sale’.

For vehicle suppliers, would a print-out or an electronic format attached to the sales contract be fulfilling the 'before the sale' requirements?

No, unless the customer can see the label 'before the sale', i.e. at the very latest before the sales contract is signed (if on paper) or the button to ...

How are custom made servers affected by the information requirements under Annex II.3.1 of the Regulation?

The information requirements listed under Annex II.3.1, consisting in the obligation to provide specific product information in instruction manuals and ...

How are one or two processor socket servers treated differently from other servers that are in scope of the Regulation (to the extent of the applicable requirements)?

Servers with one or two processor sockets are subject to additional idle state power and active efficiency requirements as set out in Annex II.2 of the ...