Testing FAQs

This is a complete list of FAQs for the energy efficient products portal, please filter by the relevant keywords or categories.

Filter by

Testing FAQs (352)

RSS

Showing results 230 to 240

Should the peak white luminance ratio of a display as described in the regulation be calculated using the brightest on-mode value determined in a configuration ?

The peak white luminance ratio as defined in the regulation should be determined in the brightest on-mode configuration which indeed can be a ...

Should the Product Information of Table 1 of Part 3 of Annex I of Regulation (EU) 206/2012 be provided for all different combinations of a multisplit air conditioner?

As indicated in the footnote to table 1, Annex I, part 3 of Regulation (EU) 206/2012: “For multi-split appliances, data shall be provided at capacity ...

Should the seasonal efficiency performance ratio (SEPR) value of process chiller in the scope of Regulation (EU) 2015/1095 include the energy consumption of the pump ?

Yes, the pump should be included in the SEPR value of process chillers ...

Should the SEPR value of process chiller include the energy consumption of the pump, even if the process chiller is not placed on the market with a pump?

Yes, the pump should be included in the SEPR value of process chillers even if the process chiller is placed on the market without ...

Should the standby consumption still include the consumption of the display?

The product should comply with the requirements on power consumption of equipment with information or status display, which is a continuous function ...

Should WL include controllers and drivers? And if not how should it be measured?

WL is defined as the nominal electric power input of the lighting system of the domestic range hood on the cooking surface. It is understood as being ...

Since the cover to reduce the noise of an refrigerator is given as an option bought separately, does it require a different label ?

The Energy Labelling Regulation provides in Article 4(4) that: A product for which changes are made that are relevant for the label or the product ...

Since the product capacity is used to calculate the efficiency values should the value be used to calculate the SEER/SCOP-values obtained in the verification measurement?

Yes, the SEER / SCOP are to be calculated with the measured capacity, because you are measuring the “real” SEER / SCOP, not the declared one; ....

Since the QR code is available with each tyre unit or batch, can “accompanied” be understood as fulfilling the obligations regarding the PIS?

Yes, under some conditions. The word “accompanied” is used in the Regulation (EU) 2020/740 in Article 4: “Suppliers shall ensure that [..] tyres […] ...

Since when has it been mandatory to register air conditioning products on the EPREL platform?

As of 1 January 2019, suppliers (manufacturers, importers or authorised representatives established in the EU) must register their products in the ...