This is a complete list of FAQs for the energy efficient products portal, please filter by the relevant keywords or categories.
These Frequently Asked Questions include questions and answers of general interest regarding the Ecodesign Directive 2009/125/EC, its implementing Regulations, the Energy Labelling Regulation (EU) 2017/1369 and its delegated Regulations. The answers provided reflect a common understanding between Commission services and the Market Surveillance Authorities of Member States. The answers as such are not legally binding. A binding interpretation of Community law is the sole competence of the European Court of Justice. These FAQs cannot go beyond or substitute for the requirements of the Ecodesign Directive or its implementing Regulations, or of the Energy Labelling Regulation (EU) 2017/1369 or its delegated Regulations.
The Ecodesign Regulations (implementing measures) and the Energy Labelling Regulations (delegated measures) are binding in their entirety and directly applicable in all Member States.
Filter by
Testing FAQs (353)
RSSBased on this description, the operating temperature range declared for these cabinets (between -2°and 2°C) almost overlaps with the chilled operating ...
Yes, you can find them on the CircaBC label templates repository. Check the suppliers ...
From the information provided, it would seem that the transformer is question can be considered as an exemption from the regulation, on the basis of the ...
Having one fan switched off during the summer (non-heating) cannot generally be considered a thermal bypass facility. It is only accepted as a bypass ...
The Standby Regulation (EU) 1275/2008 defines the networked standby mode and requires the presence of a power management function that switches the ...
The tyre label is intended as an aid to support the user in an informed purchase decision. It is crucial, therefore, that the user can see the label ...
The information to be provided for NRVUs (non-residential ventilation units) according to Annex V of Regulation (EU) 1253/2014 should be based on the ...
If a whole ventilation unit is designed, manufactured and delivered under the approach that it is a bidirectional ventilation unit (in line with the ...
As per the provision laid down in Annex II.1.2.3 to the regulation, manufacturers must make available the latest available version of the firmware ...
No. The standby mode provides only one or more of the following functions:
a reactivation function, or reactivation function and indication of enabled ...